LG LDV-S504 Owner's Manual page 18

8. Attach the hard disk mounting brackets in
reverse order from step 4 to step 3.
9. Connect the power cable.
Extension
HDD power cable.
10. Connect the IDE cable to the IDE connector on
the main board. You must connect the IDE cable
as shown below.
Primary IDE cable
IDE1 (Primary
HDD connector)
11. Assemble the front panel and top case.
12. Fix the screws.
13. After installing the HDD, you must format the
HDD using the setup menu (See page 35).
Notes :
• When you add the new HDD, do not change the
position or jump setting of HDD.
It may delete the current data and cause a mal-
function.
• You must connect the Primary IDE cable to Primary
IDE connector on the main board and the
Secondary IDE cable to Secondary IDE connector
on the main board.
18
Power cable of
power supply.
Secondary IDE cable
IDE2 (Secondary
HDD connector)
Replace the hard disk drive
Turn the power of the unit off and detach the power
plug from the outlet.
1. Follow steps 1-3 as shown [Install the hard disk
drive].
2. Remove the screws and detach the hard disk
mounting brackets from the unit.
3. Remove the connector from the HDD.
4. Remove the screws from the hard disk drive on
the left/right side of hard disk mounting bracket.