Rotating The Monitor - BenQ PD3200Q User Manual

Rotating the monitor

1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90
degrees.
Click to launch the
to set the display to rotate with the monitor automatically.
Auto Pivot
Alternatively, right-click the desktop and select
in
Portrait Orientation
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
orientation. Refer to the help document of your operating system for details.
2. Fully extend the monitor and tilt it.
Gently lift the display up and extend it to the maximum
extended position. Then tilt the monitor.
The monitor should be vertically extended to allow to rotate
from landscape to portrait mode.
3. Rotate the monitor 90 degrees clockwise as
illustrated.
To avoid the edge of the LCD display hitting the monitor base
surface while it is being rotated, do tilt and extend the monitor
to the highest position before you start to rotate the display. You
should also make sure there are no obstacles around the monitor
and there is enough room for cables. Remove the connected USB
peripherals and audio cable first.
22 How to assemble your monitor hardware
Display Pilot Software
, and apply the setting.
(downloaded from www.BenQ.com), and check
Screen resolution
from the popup menu. Select
90