Advertisement
3.1.4 Removing the REAR BRACKET
(See Fig.4)
(1) Remove the one screw D attaching the LINE OUT JACK.
(2) Remove the one screw E attaching the ANTENNA CABLE.
(3) Remove the one screw F attaching the DAB ANTENNA ter-
minal.
(4) Remove the one screw G attaching the REMOTE CABLE.
(5) Remove the one screw H attaching the IC bracket.
(6) Remove the three screws J attaching the REAR BRACK-
ET.
3.1.5 Removing the MAIN BOARD assembly
(See Fig.5)
(1) Remove the two screws K attaching the MAIN BOARD as-
sembly.
(2) Disconnect the connector
BOARD assembly and CD mechanism assembly.
3.1.6 Removing the CD mechanism assembly
(See Fig.6)
(1) Remove the three screws L attaching the CD mechanism
assembly.
3.1.7 Removing the REAR COVER
(See Fig.7)
(1) Remove the VOLUME KNOB.
(2) Remove the five screws M attaching the REAR COVER.
(3) Disengage fourteen hooks c engaged the REAR COVER.
3.2
CD mechanism assembly section
For CD mechanism assembly, please refer the service manual TN2007-1010 ,
1-8 (No.MA319)
CN501
connected MAIN
J
F
G
D
H
E
Fig.4
K
CN501
Fig.5
L
Fig.6
M
hook
hook
M
c
c
Fig.7
No.MY005
and No.MY005B.
J
J
K
L
L
hook
c
M
M
Advertisement
