Download
Share
Print this page
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Car Receiver
  5. KD-DB101EX
  6. Service manual

JVC KD-DB101EX Service Manual

Hide thumbs Also See for KD-DB101EX:

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
4 S ERVICE MANUAL
2007
MA319
KD-DB101EX, KD-DB101EY
COPYRIGHT © 2007 Victor Company of Japan, Limited
Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade)
Lead free solder used in the board (material : Sn-Cu, melting point : 230 Centigrade)
1
PRECAUTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
2
SPECIFIC SERVICE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
3
DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
4
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
5
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
CD RECEIVER

TABLE OF CONTENTS

COPYRIGHT © 2007 Victor Company of Japan, Limited
No.MA319
2007/4

Advertisement

loading

Related Manuals for JVC KD-DB101EX

Summary of Contents for JVC KD-DB101EX

  • Page 1: Table Of Contents

    MA319 2007 4 S ERVICE MANUAL KD-DB101EX, KD-DB101EY COPYRIGHT © 2007 Victor Company of Japan, Limited Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade) Lead free solder used in the board (material : Sn-Cu, melting point : 230 Centigrade) TABLE OF CONTENTS PRECAUTION.
  • Page 2 SPECIFICATION AUDIO AMPLIFIER SECTION Maximum Power Output Front/Rear 50 W per channel 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than Continuous Power Output Front/Rear (RMS) 0.8% total harmonic distortion. 4 Ω (4 Ω to 8 Ω allowance) Load Impedance Tone Control Range Bass...

  • Page 3: Precaution

    SECTION 1 PRECAUTION Safety Precautions Burrs formed during molding may be left over on some parts of the chassis. Therefore, pay attention to such burrs in the case of preforming repair of this system. Please use enough caution not to see the beam directly or touch it in case of an adjustment or operation check.
  • Page 4 Preventing static electricity Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs. 1.2.1 Grounding to prevent damage by static electricity Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as laser products.
  • Page 5 Important for laser products 1.CLASS 1 LASER PRODUCT 5.CAUTION : If safety switches malfunction, the laser is able to function. 2.CAUTION : (For U.S.A.) Visible and/or invisible class II laser radiation 6.CAUTION : Use of controls, adjustments or performance of when open.

  • Page 6: Specific Service Instructions

    SECTION 2 SPECIFIC SERVICE INSTRUCTIONS This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS. 1-6 (No.MA319)

  • Page 7: Disassembly

    SECTION 3 DISASSEMBLY Main body 3.1.1 Removing the BOTTOM COVER (See Fig.1) (1) Disengage five hooks a engaged the BOTTOM COVER. Fig.1 3.1.2 Removing the HEAT SINK (See Fig.2) (1) Remove the two screws A and one screw B attaching the HEAT SINK.
  • Page 8 3.1.4 Removing the REAR BRACKET (See Fig.4) (1) Remove the one screw D attaching the LINE OUT JACK. (2) Remove the one screw E attaching the ANTENNA CABLE. (3) Remove the one screw F attaching the DAB ANTENNA ter- minal. (4) Remove the one screw G attaching the REMOTE CABLE.

  • Page 9: Adjustment

    The loss of 6dB need not be considered since (4) Tracking offset meter direct reading of figures are applied in this working standard. (5) Test Disc JVC: CTS-1000 (6) Extension cable for check Standard measuring conditions EXTSH002-22P × 1 Power supply voltage: DC14.4V(10.5 - 16V)

  • Page 10: Troubleshooting

    SECTION 5 TROUBLESHOOTING 16 PIN CORD DIAGRAM Black Green VI/BK Violet GY/BK Blue Gray WH/BK BL/WH White Yellow GN/BK Brown VI/BK GY/BK WH/BK GN/BK MEMORY MEMORY BACKUP DIRECT TO BATTERY +12Volt REMOTE BL/WH ACC + 12Volt GROUND Rear Right Auto Antenna Front Right...
  • Page 11 (No.MA319)1-11...
  • Page 12 Victor company of Japan, Limited Mobile Entertainment Business Group Mobile Entertainment Category 10-1,1chome,Ohwatari-machi,Maebashi-city,Gumma-ken, 371-8543,Japan (No.MA319) Printed in Japan...

This manual is also suitable for:

Kd-db101ey