Storing Stations In Memory - JVC KD-LH401 Service Manual

When an FM stereo broadcast is hard to
receive:
Set the FM reception mode to "Mono On."
1
Press M MODE while listening to an FM
stereo broadcast.
"Mode" appears on the display.
The next-step-operation buttons
start flashing.
2
Press number button 1 to select "Mono On"
while "Mode" is still on the display.
Each time you press the button, "Mono On" or
"Mono Off" appears alternately.
The display returns to the source indication
screen.
MONO indicator appears.
The sound you hear becomes monaural but the
reception will be improved.
12
After about
5 seconds

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
1
Select the FM band (FM1 – 3) you
want to store FM stations into.
Each time you press the
button, the band changes as
follows:
2
Start automatic preset.
1 Press M MODE.
"Mode" appears on the
display.
The next-step-operation
buttons start flashing.
2 Press and hold number button 5 while
"Mode" is still on the display.
"SSM" appears, then disappears
when automatic preset is over.