JVC KD-LH401 Service Manual page 12

3.1.10 Removing the front board
(See Figs.15 to 18)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) From the rear side of the front panel assembly, remove the
four screws P attaching the rear cover assembly to the front
panel assembly. (See Fig.15.)
(2) Release the twelve joints c of the front panel assembly and
remove the rear cover assembly. (See Fig.16.)
(3) From the left side of the front panel assembly, pull out the
knob in the direction of the arrow 2 while pulling the front
board in the direction of the arrow 1. (See Fig.17.)
(4) Take out the front board from the front panel assembly.
(See Fig.18.)
Note:
When removing the rear cover assembly and front board, be
careful not to lose the comp. spring. (See Fig.18.)
1-12 (No.MA063)
P
Rear cover assembly
Fig.15
Rear cover assembly
joints c
joints c
Fig.16
Front board
Front panel assembly
1
Fig.17
Front panel assembly
Comp. spring
Fig.18
P
P
joints c
joints c
Knob
2
Front board