Cisco WAP 121 Administration Manual page 64

Work Group Bridge
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
REVIEW DRAFT Version 2—CISCO CONFIDENTIAL
-
-
See
and WPA Personal security settings.
Configure the upstream BSS with the same SSID and security as advertised
by upstream AP. The upstream BSS will be associated to the upstream AP
with the configured credentials. The AP may obtains its IP address from a
DHCP server on the upstream link. Alternatively, you can assign a static IP
address.
In the downstream direction, clients associate to the downstream BSS.
• —The type of security to use for authenticating as a client station
on the upstream AP and for authenticating downstream client stations to the
AP.
•
- —The set of clients in the APs BSS that can access the
upstream network is not restricted to the clients specified in a MAC
address list.
- —The set of clients in the APs BSS that can access the upstream
network is restricted to the clients specified in a locally defined MAC
address list.
- —The set of clients in the APs BSS that can access the upstream
network is restricted to the clients specified in a MAC address list on a
RADIUS server.
If you select Local or RADIUS, see
on creating the MAC filter list.
• —The VLAN associated with the BSS.
Click . The changes are saved to the Running Configuration and to the Startup
Configuration.
The associated downstream clients will now have connectivity to the upstream
network.
—Select one of the following:
for information about WEP
for instructions
64