Scheduler - Cisco WAP 121 Administration Manual

Scheduler

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
REVIEW DRAFT Version 2—CISCO CONFIDENTIAL
• —The RADIUS key is the shared secret key for the global RADIUS
server. You can use up to 63 standard alphanumeric and special characters.
The key is case sensitive, and you must configure the same key on the AP
and on your RADIUS server. The text you enter will be displayed as "*"
characters to prevent others from seeing the RADIUS key as you type.
• —The RADIUS key associated with the configured backup RADIUS
servers. The server at RADIUS IP Address-1 uses RADIUS Key-1, RADIUS IP
Address-2 uses RADIUS Key-2, and so on.
•
particular user has consumed such as system time, amount of data
transmitted and received, and so on.
If you enable RADIUS accounting, it is enabled for the primary RADIUS
server and all backup servers.
•
server, rather than having the AP attempt to contact each configured server
in sequence and choose the first server that is up.
key is refreshed for clients associated to this VAP.
The default is 300. The valid range is 0–86400 seconds. A value of 0
indicates that the broadcast key is not refreshed.
•
(unicast) keys for each client associated to the VAP.
The valid range is 0–86400 seconds. A value of 0 indicates that the session
key is not refreshed.
The Radio and VAP Scheduler allows you to configure a rule with a specific time
interval for VAPs or radios to be operational, thereby automating the enabling or
disabling of the VAPs and radio.
One way you can use this feature is to schedule the radio to operate only during
the office working hours in order to achieve security and reduce power
consumption. You can also use the Scheduler to allow access to VAPs for wireless
clients only during specific times of day.
—Tracks and measures the resources a
—Enables administratively selecting the active RADIUS
—The interval at which the broadcast (group)
—The interval at which the AP refreshes session
55