Vcr Control Buttons - Pioneer Elite PRO-1140HD Operating Instructions Manual

Useful Remote Control Features
1
2
3
4
5

VCR control buttons

When the VCR is preset by the remote control's learning
function, the remote control buttons function as follows:
(Mode switch must be set to VCR).
• Press the input selector button (INPUT 1–6) that matches
the input terminal connected to the VCR. The VCR can be
operated using 1 to 8.
• VCRs made by manufacturers not listed in the system can be
controlled using the remote control if buttons 1 to 8 have
learned the functions. See page 92.
1
2
3
4
5
6
6
7
7
8
8
Mode switch
(with "VCR"
selected)
• The color-highlighted buttons on the remote control can
learn the control signal from another device's remote
control.
CH +/–
Selects the channel on the VCR
 (PLAY)
Selects playback
 (RWD)
Rewinds the tape and allows picture search
SOURCE 
Turns the power of the VCR On and Off
 (PAUSE/STILL)
Pauses playback and displays still pictures
 (FF)
Rapidly advances the tape and allows picture search
 (REC)
Starts recording
 (STOP)
Stops tape transport
NOTE
13
101
En