Pioneer PDP-428XG Operating Instructions Manual page 58

11 Using the HDMI Control
Connecting a DVD recorder
MONITOR SUB
OUT WOOFER
(Rear view)
DVD recorder
Note
• Maximum number of devices that can be connected and
controlled using the remote control unit of the plasma
television is as follows: recorder x 2, player x 2, AV system x 1.
• When connecting an AV system, be sure to place and connect
it between the plasma television and recorder or player.
• Do not connect an AV system that does not support the HDMI
Control functions between the plasma television and a
recorder/player, otherwise the HDMI Control functions may not
operate properly.
• When connecting an AV system that does not support the
HDMI Control functions and a player/recorder that supports
the HDMI Control functions to the plasma television, connect
the AV system to the MONITOR OUT terminal on the plasma
television using a stereo audio cable, and the recorder/player
to the HDMI terminal using an HDMI compliant cable (see the
illustration).
• HDMI Control may not operate properly if you do not use an
HDMI cable that supports the HDMI 1.3 Specification.
58
En
HDMI compliant cable
(HDMI cable having the
HDMI mark)
MONITOR SUB
OUT WOOFER
(Rear view)
MONITOR SUB
OUT WOOFER
Stereo HDMI compliant cable
audio cable (HDMI cable having the
HDMI mark)
AV amp DVD recorder
• After making connections, enter the setting in "Input Setting"
for "HDMI Control Setting". Be sure that the setting is entered
in each HDMI input terminal to which the device is connected.
• Settings in the connected device(s) are also required to use the
HDMI Control functions. For details, see the operation manual
that came with the connected device(s).
• When a recorder is connected, its power is automatically
switched on as the plasma television is turned On to help make
the recording smoother.
• For more information on the devices that support the HDMI
Control functions, check the Pioneer Web site (see back cover).