Pioneer PDP-428XG Operating Instructions Manual page 30

08 Setting up
Using the Picture Detail
1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "Picture Detail" (/ then ENTER).
5 Select an item to be adjusted (/ then ENTER).
• You can select "DRE Picture", "Black Level", "ACL", "Enhancer
Mode" or "Gamma".
6 Select the desired parameter (/ then ENTER).
DRE Picture
Emphasizes the contrast on images so that the difference between brightness
and darkness becomes more distinct
Selections Off
High
Mid
Low
Black Level
Emphasizes dark portion on images so that the difference between brightness
and darkness becomes more distinct
Selections Off
On
ACL
Performs such compensation that results in the optimum contrast
characteristics for images
Selections Off
On
Enhancer Mode
Selects processing of the image's high frequency (detailed) areas
Selections 1
2
3
Gamma
Adjusts the gamma characteristics (image gradation characteristics)
Selections 1
2
3
7 Press HOME MENU to exit the menu.
30
En
Deactivates DRE Picture
Enhanced DRE Picture
Standard DRE Picture
Moderate DRE Picture
Deactivates Black Level
Activates Black Level
Deactivates ACL
Activates ACL
Selects Hard (SHARPNESS) image
Selects Natural (SHARPNESS) image
Selects Soft (SHARPNESS) image
Selects gamma characteristics 1
Selects gamma characteristics 2
Selects gamma characteristics 3
Using Color Temp
1 Press HOME MENU.
2 Select "Picture" (/ then ENTER).
3 Select "Pro Adjust" (/ then ENTER).
4 Select "Color Detail" (/ then ENTER).
5 Select "Color Temp" (/ then ENTER).
6 Select the desired parameter (/ then ENTER).
Color Temp
Adjusts the color temperature, resulting in a better white balance
Selections High White with bluish tone
Mid-High Intermediate tone between High and Mid
Mid Natural tone
Mid-Low Intermediate tone between Mid and Low
Low White with reddish tone
Manual Color temperature adjusted to your
preference
• You may rather want to perform fine adjustment. To do this,
select "Manual" first and then press and hold ENTER for more
than three seconds. The manual adjustment screen appears.
Then go to step 7.
7 Select an item to be adjusted (/ then ENTER).
8 Select the desired level (/).
 button
Item
R High
Fine adjustment for For weaker red
bright portions
G High For weaker green
B High For weaker blue
R Low Fine adjustment for For weaker red
dark portions
G Low For weaker green
B Low For weaker blue
• To perform adjustment for another item, press RETURN, and
then repeat steps 7 and 8.
• You may press / to immediately change an item to be
adjusted.
9 Press HOME MENU to exit the menu.
 button
For stronger red
For stronger green
For stronger blue
For stronger red
For stronger green
For stronger blue