Table of Contents
Advertisement
Available languages
Available languages
Enjoying DTV broadcasts
Reconfiguring the DTV channel settings
This section describes how to reconfigure the DTV channel settings
after setting up DTV channels using Auto Installation (page 25). You
can select "DTV Setup" only when watching DTV channels.
Reselecting a country
1
Press HOME MENU.
2
Select "Setup" (/ then ENTER).
3
Select "DTV Setup" (/ then ENTER).
4
Select "Installation" (/ then ENTER).
The password entry screen appears. Enter your 4-digit password using
buttons 0 to 9.
5
Select "Country" (/).
6
Select a country (/).
Installation
Aerial Power
Country
Add New Channels
Replace Existing Channels
Signal Check
Restore System Defaults
Note
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 47.
• You can select "DTV Setup" only when watching DTV channels.
Replacing the existing channels
The following procedure discards the current DTV channel setups and
searches for receivable channels to redo the channel setups.
1
Press HOME MENU.
2
Select "Setup" (/ then ENTER).
3
Select "DTV Setup" (/ then ENTER).
4
Select "Installation" (/ then ENTER).
The password entry screen appears. Enter your 4-digit password using
buttons 0 to 9.
Off
Germany
5
Select "Replace Existing Channels" (/ then ENTER).
The system first erases all channel information and then starts
channel search.
Replace Existing Channels
Search Information
Existing Channels
Channels Found
Progress
• To quit a channel search in progress, press HOME MENU.
Note
• To complete "Replace Existing Channels", there must be more than
1 hour at least left to the next preset recording or preset Auto
Update time.
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 47.
• You can select "DTV Setup" only when watching DTV channels.
Adding new channels
Use the following procedure to search and register new channels with
the current DTV channel setups saved.
1
Press HOME MENU.
2
Select "Setup" (/ then ENTER).
3
Select "DTV Setup" (/ then ENTER).
4
Select "Installation" (/ then ENTER).
The password entry screen appears. Enter your 4-digit password using
buttons 0 to 9.
5
Select "Add New Channels" (/ then ENTER).
Installation
Aerial Power
Country
Add New Channels
Replace Existing Channels
Signal Check
Restore System Defaults
Channel search automatically starts. If any new channel is found, it is
automatically registered on the plasma television.
Add New Channels
Search Information
Existing Channels
Channels Found
Progress
Found Channels
04
001
************
20
002
************
30%
003
******
004
************
Off
Germany
Found Channels
04
001
************
20
002
************
30%
003
******
004
************
09
35
En
Hide quick links:
Advertisement
Chapters
Table of Contents
