Setting The Channel Levels - Pioneer XW-DV1WS Operating Instructions Manual

09 Surround sound and other settings
Function setting for TV input
• TV -> OFF/PDP1–5/PDPTV – Matches the
TV function of this unit with a numbered
video input on the plasma display. For
example, TV -> PDP1 matches the TV
input with video input 1 on the plasma
display.
Function setting for L1 input
• LINE1 -> OFF/PDP1–5/PDPTV – Matches
the LINE (L1) function of this unit with a
numbered video input on the plasma
display. For example, LINE1 -> PDP3
matches the LINE1 input with video input 3
on the plasma display.
Function setting for L2 input
• LINE2 -> OFF/PDP1–5/PDPTV – Matches
the LINE (L2) function of this unit with a
numbered video input on the plasma
display. For example, LINE2 -> PDP3
matches the LINE2 input with video input 3
on the plasma display.
52
En

Setting the channel levels

You can set the relative channel levels from
your main listening position for all of the
listening modes independently. However, the
SURROUND modes are divided into two
independent groups: multichannel listening
modes and stereo listening modes only.
If you used the Room Setup feature (page 20),
the channel levels for each listening mode will
already be set. However, you can still fine-tune
the levels here if you need to.
CD FM/AM L1/L2
DVD TUNER TV LINE
FRONT
SURROUND OPEN CLOSE
0
8
1 3 ¡
4 4
7
DVD MENU RETURN
TUNE+
ST– ST+
ENTER ENTER
TUNE–
MUTE SOUND
MASTER
VOLUME
TV CONTROL
1 Select a listening mode.
Press SURROUND, ADVANCED or FRONT
SURROUND repeatedly to select the listening
mode you want.
2 Switch the remote control to SUB, then
press TEST TONE to hear the test tone.
The test tone is output in the following order
(from the speakers active in the current
listening mode):
• L – Front left speaker
• C – Center speaker
• R – Front right speaker
• RS – Right surround speaker
• LS – Left surround speaker
• SW – Subwoofer
CH LEVEL
SURROUND ADVANCED VIRTUAL SB
PROGRAM REPEAT RANDOM
AUDIO SUBTITLE ANGLE
HOME
ZOOM TOP MENU MENU
1 2 3
SYSTEM QUIET/
MIDNIGHT
SETUP TEST TONE TEST TONE
4 5 5 6
TIMER/
DIMMER DISPLAY CLOCK
7 8 9
SR+ FOLDER– FOLDER+
0
ENTER
CLR
WIRELESS
ROOM SETUP
MAIN SUB SUB