Selecting Other Languages For Language Options - Pioneer RCS-404H Operating Instructions Manual

The Initial Setup menu
About the input colour system
The available options of the Input Colour System setting
depend on the Input Line System setting. The table below
shows the different options available.
Input Line
Built-in tuner External input
System
625 System Auto
PAL
SECAM
525 System n/a
Additional information about component
video output
If you switch the Component Video Out setting to
Progressive when using a TV that is not compatible with
progressive-scan video, you will not be able to see
anything displayed on your TV. If this happens, press and
STOP button on the front panel, then press
hold the
PLAY. This will set the recorder's video output back to
Interlace.
Auto
PAL
SECAM
Auto
3.58 NTSC
PAL–60
Selecting other languages for
language options
ENTER
1 Select 'Other' from the language list.
This option appears in the settings for DVD Menu
Language, Audio Language, and Subtitle Language.
ENTER
2 Select the language you want.
Initial Setup
Basic OSD DVD Menu Language
Tuner Audio Language
Language
Video In/Out Subtitle Language
Number
Audio In Auto Language
Audio Out DVD Menu Language DVD Menu Language
Language Subtitle Display
Language
Recording
Playback
• Select by language name: Use the
change the language.
• Select by code number: Press
number buttons to enter the four-digit language
code.
See Language code list on page 146 for a list of available
languages and corresponding codes.
English
0 1 4
5
buttons to
then use the
15
135
En