Msds Of Electrolyte - Amprobe WT-50 User Manual

MATERIAL SAFETY DATA SHEET OF ELECTROLYTE
SECTION I - IDENTITY INFORMATION
INGREDIENT: KBr
Chemical Name: potassium bromide; bromide salt of potassium
CAS No. : 7758-02-3
Manufacturer: Shanghai Guanghua Techonology Ltd.
http://www.e-chem.com.cn
Phone: +86 021-52176011
Email:chemol@hi2000.com
Date Prepared: 2004-01-01
SECTION II -PHYSICAL/CHEMICAL CHARACTERISTIC
Boiling Point: 1380 degree C / 2516˚F
Melting Point: 730 degree C / 1346˚F
Vapor Pressure: 0.13 kPa@795 degree C / 1463˚F
Water Solubility: Soluble
Appearance /Odor: white granules with a bitter, saline taste, odorless
SECTION III - HEALTH HAZARD DATA
Route Of Entry: Inhalation, Ingestion, and skin absorption
Health Hazards: Inhalation may cause respiratory tract irritation. Irritative
to eyes and skin. Harmful if swallowed. May cause headache, dizziness,
drowsiness, and nausea.
SECTION IV: EMERGENCY & FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lift the upper and lower eyelids. Get medical aid.
Skin: Remove contaminated clothing and shoes. Flush skin with plenty of
water for at least 15 minutes Get medical aid.
Inhalation: Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Ingestion: If swallowed, Do NOT induce vomiting. Wash out mouth with water
and give plenty of water to drink. Seek immediate medical attention.
Special Fire Fighting Procedures: Wear self-contained breathing apparatus and
protective clothing to prevent contact with skin and clothing.
Unusual Fire & Explosion Hazards: Emits toxic fumes under fire conditions.
12