Msds - Amprobe WT-40 User Manual

Dual display ph, mv & temp. meter
Table of Contents

Advertisement

MATERIAL SAFETY DATA SHEET OF SOAK SOLUTION
SECTION I - IDENTITY INFORMATION
INGREDIENT: KCL
CHEMICAL NAME: Potassium monochloride
CAS No.:7447-40-7
MANUFACTURER: Ajax Finechem (http://www.ajaxfinechem.com/)
PHONE: +61 1300 884 078
DATE PREPARED: 2006-04-24
SECTION II -PHYSICAL/CHEMICAL CHARACTERISTIC
BOILING POINT: Not available
MELTING POINT: 773 degree C / 1423°F
VAPOR PRESSURE: Not available.
WATER SOLUBILITY: Soluble
APPEARANCE /ODOR: Colourless or white crystals, odorless
SECTION III - HEALTH HAZARD DATA
ROUTE OF ENTRY: Inhalation, Ingestion, skin & eye absorption
HEALTH HAZARDS: Inhalation may cause respiratory tract irritation. Irritative
to eyes and skin. Harmful if swallowed.
SECTION IV: EMERGENCY & FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lift the upper and lower eyelids. Get medical aid.
SKIN: Remove contaminated clothing and shoes. Flush skin with plenty of
water for at least 15 minutes. Get medical aid.
INHALATION: Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
INGESTION: Do not induce vomiting. Get medical aid if irritation or symptoms
occur.
11

Advertisement

Table of Contents
loading

Table of Contents