Resetting The Player; Dvd-Video Regions - Pioneer Elite DV-46AV Operating Instructions Manual

08 Additional information
Standard TV users
If you have a standard TV, the TV Screen
setting (page 41) of this player should be set to
4:3 (Letter Box) or 4:3 (Pan&Scan),
depending on which you prefer.
Set to 4:3 (Letter Box), widescreen discs are
shown with black bars top and bottom.
Set to 4:3 (Pan&Scan), widescreen discs are
shown with the left and right sides cropped.
Although the picture looks larger, you don't
actually see the whole picture.
Please note that many widescreen discs
override the player's settings so that the disc is
shown in letter box format regardless of the
setting.
Note
• Using the 16:9 (Wide) setting with a
standard 4:3 TV, or either of the 4:3 settings
with a widescreen TV, will result in a
distorted picture.
54
En

Resetting the player

Use this procedure to reset all the player's
settings to the factory default.
1 Switch the player into standby.
2 Using the front panel buttons, hold
down the STOP button and press
STANDBY/ON to switch the player back
on.
All the player's settings are now reset.

DVD-Video regions

All DVD-Video discs carry a region mark on the
case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD player also has a region mark,
which you can find on the rear panel. Discs
from incompatible regions will not play in this
player. In this case the attention sentence
"Incompatible disc region number Can't play
disc" is displayed on screen. Discs marked ALL
will play in any player.
The diagram below shows the various DVD
regions of the world.
1
2
4
5
1
6 2
3
5
2
4