Video Output Settings - Pioneer Elite DV-46AV Operating Instructions Manual

Initial Settings menu

Video Output settings

Setting
TV Screen
(This setting effective for
analog and HDMI video
output. See also Screen
sizes and disc formats
on page 53.)
Component Out
a
HDMI Resolution
(Default changes
with TV format (PAL/
NTSC).)
b
HDMI Color
(Default changes
depending on device
connected.)
a. You can also use the HDMI RESOLUTION button on the remote control to switch this setting.
b. You can also use the HDMI COLOR button on the remote control to switch this setting.
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
Interlace
Progressive
1920x1080i
1280x720p
720x480p (NTSC)
720x480i (NTSC)
Full range RGB
RGB
Component
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
Set if you have a widescreen TV.
Set if your TV is not compatible with progressive scan video.
Set if your TV is compatible with progressive scan video (see
your TV's instruction manual for details). See also Switching
the video output to interlace using the remote controls on
page 14.
Note that progressive scan video is only output from the
component video jacks.
Set if your TV supports 1920 x 1080 pixel interlace video.
Set if your TV supports 1280 x 720 pixel progressive-scan video.
Set if your TV supports 720 x 480 pixel (NTSC) progressive-scan
video.
Set if your TV supports 720 x 480 pixel (NTSC) interlace video.
If colors are weak, this gives brighter colors and deeper black.
Use this setting if colors appear overly rich on the Full Range
RGB setting.
Outputs component video format (default setting for HDMI-
compatible devices).
07
41
En