Hdmi Troubleshooting - Pioneer Elite DV-46AV Operating Instructions Manual

08 Additional information

HDMI troubleshooting

Problem
No HDMI audio output.
No HDMI video output.
No multichannel HDMI
audio.
58
En
Remedy
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, unreliable signal transfers may result.
• If the front panel HDMI indicator is lit:
– You won't hear any sound from the HDMI output if the source
component is only DVI/HDCP-compatible.
– It is not possible to output SACD sources from the HDMI connection
of this player.
• If the front panel HDMI indicator is unlit then:
– Make sure that you've selected this player as the HDMI input in the
settings for the component you're using. You may need to refer to the
instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable
isn't damaged.
– Check that components connected using the HDMI interface are
switched on and HDMI compatible.
• Make sure that you've selected this player as the HDMI input in the
settings for the component you're using. You may need to refer to the
instruction manual of the component to do this.
• It is not possible to output SACD source from the HDMI connection
of this player.
• Check that the HDMI cable is connected properly and that the cable
isn't damaged.
• Check that components connected using the HDMI interface are
switched on and HDMI compatible.
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, using a DVI connection may result in unreliable
signal transfers.
• Make sure the resolution on this player matches that of the
component you have connected using HDMI. See HDMI Resolution
on page 41 to change the HDMI resolution. See Resetting the output
resolution to the default setting with HDMI connection on page 17 if
you want to reset the output resolution.
• Make sure the HDMI Out setting is set to Auto or LPCM (5.1CH)
(see HDMI Out on page 40 to do this). See also About the HDMI
output settings on page 48 and HDMI output with DVD-Audio sources
on page 49.