If You Are Using Unix Or Linux (B840Dn) - Oki B820n User Manual

Hide thumbs Also See for B820n:
Table of Contents

Advertisement

Appendix
If you are using UNIX or Linux
Use an LPD protocol
This explains how to print using a TCP/IP LPD protocol (lpr or lp
command). For details of the lpr and lp command, please refer to
the UNIX manual.
About LPD
LPD (Line Printer Daemon) is a protocol to print with a printer on
the network.
• About logical printers
This printer has three logical printers.
Logical printers
lp
If printing a PostScript or PCL format file
sjis
If printing a shift JIS Japanese character code text file
euc
If printing a euc Japanese character code text file
• sjis and euc are PostScript printer functions only.
Note!
The following explanation uses the environment shown below as an example.
Printer
: B840dn
IP Address
: 192.168.0.2
MAC address
: 00:80:87:84:9C:9B
220
(B840dn)
Function
• Configure UNIX settings and print
For Sun Solaris2.6 and 8
• You must have super - user rights.
Note!
The remote printer registration method using Admintool on
OpenWindows cannot be used on this printer, as the output
destination and queue name would be the same. Remote print-
ers can be registered with the following method.
If Solaris 2.x's connection with the remote printer is stuck for
a long time, based on its system specifications it will consider
this to be an error, and will force disconnect. Therefore, if there
is a waiting time due to running out of paper while printing or
an online error, the printer will cut the connection.
Log in as the UNIX administrator (root).
Register the printer's IP address and host name in the /etc/
hosts file.
192.168.0.2 ML
Check the connection using a ping command.
# ping ML
Register the print server.
# lpadmin -p ML_lp -m netstandard -o protocol=bsd -o
dest=ML:lp -v /dev/null
• The "lp" following ":" is a logical printer.
Note!
You may need to set the printer type or file content type de-
pending on the file format you are printing. For details, please
refer to the manual that came with your OS.
Enable the print queue.
#/usr/sbin/accept ML_lp
#/usr/bin/enable ML_lp

Advertisement

Table of Contents
loading

This manual is also suitable for:

B840dn

Table of Contents