Table of Contents
Advertisement
Note:
After the camera is powered on, an SD icon will appear on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card). If
the SD card is locked this will prevent the camera from saving captured photos to the SD card.
POWER ON
Press the
Power or
ATTACHING THE STRAP
T o attach the lens and neck straps to your camera, please follow the instructions below:
1)
Insert one end of the neck strap through the strap eyelet.
2)
Route it through the buckle as the inner loop.
3)
Route the other end of the neck strap to the other strap buckle to secure it.
Follow the above steps to attach the other side of the neck strap.
4)
Insert one end of the lens strap through the strap eyelet.
5)
Make a loop to secure it.
6)
Attach the other end of the lens strap on the lens cover.
7)
Once complete, make sure the straps are tight.
Congratulations! Your camera is now ready to use.
Playback button to turn on the camera.
8
Hide quick links:
Advertisement
Table of Contents
