MSI MS-5148 User Manual page 58

Resume by Alarm
This function is for setting date and time for your computer to boot
up. During Disabled you can not use this function. And during Enabled
choose the Date and Time Alarm:
Date(of month) Alarm
Time(hh:mm:ss) Alarm
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system, before this function will work.
IRQ 8 Clock Event
IRQ[3-7,9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floopy Disk
Serial Port
Parallel Port
During Enabled, if any interrupt event happened the system will turn
on form the suspend mode. And during Disabled, the system will not
monitor any interrupt event.
You can choose which month the system
will boot up.
You can choose what hour, minute and
second the system will boot up.
: Enabled
: Enabled
: Disabled
: Disabled
: Disabled
: Enabled
: Enabled
: Enabled
3-25