Introduction Of Advanced Built-Cd Player (Mp3/Wma) Operation - Pioneer DEH-P8400MP Operation Manual

MP3/WMA Player
• There is sometimes a delay between starting
up playback and the sound being issued. This
is particularly the case when playing back
multi-session and many folders. When being
read in,
Format Read
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press to eject the disc, and check the
EJECT
disc for damage before inserting the disc
again.
• Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
• When playing back files recorded as VBR
(Variable Bit Rate) files, the play time will not
be correctly displayed if fast-forward or
reverse operations are used.
• If inserted disc contains no files that can be
played back,
No Audio
• There is no sound on fast-forward or reverse.
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to Understanding built-in
CD player error messages on page 55.
is displayed.
is displayed.
may
ERROR-11
Introduction of advanced built-in
CD player (MP3/WMA) operation
1
1
display
FUNCTION
Shows the function status.
1 Press to open the front panel.
OPEN
2 Press to display the function
FUNCTION
names.
Press repeatedly to switch between
FUNCTION
the following functions:
(repeat play)—
PMODE
(scan play)—
SCAN PAUSE
• To return to the playback display, press
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
(random play)—
RDM
(pause)
BAND
En
Section
05
.
25