Card Slot Requirements - Cisco NCS 4000 Series Hardware Installation

Chassis Overview

Card Slot Requirements

Card Slot Requirements
This figure shows card installation for the Cisco NCS 4016 chassis.
Figure 7: Installing Cards in the Cisco NCS 4016 Chassis
The Cisco NCS 4016 chassis has 22 card slots numbered sequentially from left to right. Slots FC0 through
FC3 are dedicated to fabric cards. Slots RP0 and RP1 are reserved for route processor cards.
Shelf assembly slots have symbols indicating the type of cards that you can install in them. Each Cisco NCS
4016 card has a corresponding symbol. The symbol on the card must match the symbol on the slot.
Hardware Installation Guide for Cisco NCS 4000 Series
12