Onkyo CS-375D Instruction Manual page 28

> Before Start > Part Names
"OFF": The unit will not automatically enter standby mode.
0 Default values vary depending on the regions.
Bluetooth Wakeup
This function wakes up the unit with BLUETOOTH input when this unit is on standby
and a BLUETOOTH wireless technology enabled device is connected.
"On": Use this function
"Off" (Default Value): Do not use this function
0 Setting to "On" increases the power consumption even when the unit is on
standby.
FM STEREO/MONO
This is displayed only when "FM" is selected as the input source.
Switch reception to receive FM stereo or monaural.
"AUTO" (default value): To receive as FM stereo
"MONO": To receive as monaural
0 The setting returns to "AUTO" if the input is changed or the unit is switched to
standby.
FM RDS (CS-375D)
This is displayed only when "FM" is selected as the input source.
∫ ASPM
You can automatically search for and register RDS stations. (
∫ PTY
You can search for RDS stations by Program Type. (
DAB SCAN (CS-375D)
This is displayed only when "DAB" is selected as the input source.
You can run the auto scan or select stations manually again when new DAB stations
28
> Install > Playback
are added or when you move house.
Software Version
The software version for the CD features, etc., are displayed.
Factory Reset
Reset the settings of this unit to the status at the time of shipment. We recommend
that you take a note of the settings you have changed before going ahead with a
factory reset. To go ahead, press ENTER when "OK?" is displayed. The unit will be
placed on standby automatically when initializing is completed.
P18)
P18)
Advanced Setup | Others