Overview; Functions; Main Functions Of The Radar Mode - JRC JMR-9230-S Installation Manual

1.Overview > 1.1 Functions
1.

Overview

1.1 Functions

Multi Function Display (referred to as "this equipment" or "MFD" in this manual) is navigation equipment that
satisfies the following IMO performance standards.
• IMO Resolution MSC192(79): Performance standards for radar equipment
• IMO Resolution MSC232(82): Performance standards for electronic chart display and information sys-
• IMO Resolution MSC191(79): Performance standards for the presentation of navigation related infor-
• IMO Resolution MSC74(69):
• IMO Resolution A.694(17):
• IMO Resolution MSC252(83): Performance standards for Integrated Navigation System (INS)
• IMO Resolution MSC302(87): Bridge Alert Management
*1: Case where the ECDIS function is added as the option
*2: Case where the TCS function is added as the option
Any of the following task functions can be added to this equipment as the option, enabling the
equipment to be used as a multi-function display.
• Radar
• ECDIS
• Conning Display
1.1.1

Main functions of the RADAR mode

• Sensitivity adjustment, sea clutter and rain/snow clutter suppression
• Interference rejection
• Bearing and range measurement using a cursor, fixed/variable range markers, and electronic bearing line
• Colored own track display
• User map creation and display
• TM (True Motion) presentation
• Self-diagnostic facilities
• Radar performance monitoring (Performance Monitor)
• Target tracking functions (manual/automatic target acquisition and tracking, vector and trail displays and
alarm displays)
• 8-unit switchover (Inter-switch) function (option)
• Electronic navigational chart display
*1
: The following databases can be displayed (ARCS cannot be displayed.)
- S-57 Ed3.0/3.1
- S-63
- C-Map Ed3.0 Professional/Professional+
- C-Map ENC
- Jeppesen PRIMAR ECDIS Service
tems (ECDIS)
mation on shipborne navigational displays
Annex 2: TCS performance standards
General requirements for shipborne radio equipment
*1
(Option)
1-1