JRC JMR-9230-S Installation Manual page 58

1.Overview > 1.2 Features
Performance monitor function
This function monitors radar performance (transmission output and reception sensitivity) on the screen.
Interswitch function (Option)
By connecting to the interswitch unit (optional), up to 8 radars can be inter-switched with simple opera-
tions.
Up to 4 units: An interswitch unit separate type from the indicator and cable for connecting each indicator
are necessary.
Up to 8 units: An interswitch unit separate type from the indicator and cable for connecting each indicator
are necessary.
ECDIS function:
This function minimizes the information that is displayed constantly and expands the chart dis-
play area.
- Can display vector charts (ENC and C-MAP) and raster chart (ARCS).
- Realizes safer sailing through the safety contour line and crossing and approaching danger zone
monitoring function. (Excluding ARCS)
- Realizes high operability through high-speed drawing and high-speed processing.
- Facilitates creation of user charts.
- Applies a multi-display screen that can display two charts concurrently. (ARCS and C-MAP Ed.3
cannot be displayed concurrently with a chart of a different type)
- Enables a course plan with multi-view.
- Can display a wide view screen while a single chart or multi-view is displayed.
- Enables creation of a route plan with the table editing function and the graphic editing function.
- Can create an alternative route while sailing.
- Automatic sailing is enabled by connecting with Auto Pilot. (option)
- The playback function enables checking of the sailed routes.
- The S-57 chart can be updated. (Chart Maintenance)
1-5