Switching The Ever Scroll; Multi Language Display Setting; Activating The Bt Audio Source - Pioneer DEH-600BT Operation Manual

Section
04 Initial Settings
Initially, the unit is set for rear full-range speak-
er connection (FULL). When rear output is
connected to full range speakers (when FULL
is selected), you can connect other full range
speakers (PREOUT :REAR) or a subwoofer
(PREOUT :SUB W) to the RCA rear output.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 40.
2 Use MULTI-CONTROL to select REAR SP.
3 Press MULTI-CONTROL to switch the
rear output setting.
Pressing MULTI-CONTROL will switch be-
tween FULL (full-range speaker) and SUB W
(subwoofer) and that status will be displayed.
# When no subwoofer is connected to the rear
output, select FULL (full-range speaker).
# When a subwoofer is connected to the rear
output, select SUB W (subwoofer).
# When the rear output setting is SUB W, you
cannot operate the following procedure.
4 Push MULTI-CONTROL left or right to
switch the subwoofer output or rear out-
put.
Pressing c or d will switch between
PREOUT :SUB W and PREOUT :REAR and that
status will be displayed.
Notes
! Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to Using subwoofer output on page
38).
! If you change this setting, subwoofer output
in the audio menu return to the factory set-
tings.
! Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.

Switching the ever scroll

When ever scroll is set to on, CD text informa-
tion scrolls continuously in the display. Set to
42
En
off if you prefer the information to scroll just
once.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 40.
2 Use MULTI-CONTROL to select
EVERSCROLL.
3 Press MULTI-CONTROL to turn the ever
scroll on.
# To turn the Ever Scroll off, press
MULTI-CONTROL again.

Multi language display setting

Text information such as title name, artist
name or comment can be recorded on a com-
pressed audio disc.
This unit can display them even if they are em-
bedded in a European language or Russian.
! If the embedded language and the selected
language setting are not the same, text in-
formation may not be displayed properly.
! Some characters may not be displayed
properly.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 40.
2 Use MULTI-CONTROL to select TITLE.
3 Press MULTI-CONTROL to select the de-
sired setting.
Pressing MULTI-CONTROL will switch be-
tween EURO (European language) and
RUSSIA (Russian language) and that status
will be displayed.

Activating the BT AUDIO source

You need to activate the BT AUDIO source in
order to use a Bluetooth audio player.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 40.