Disconnecting A Bluetooth Audio Player; Basic Operations; Introduction To Advanced Operations - Pioneer DEH-600BT Operation Manual

Cd rds receiver
Hide thumbs Also See for DEH-600BT:
Table of Contents

Advertisement

Operating this unit
Connecting a paired Bluetooth audio
player
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
CONNECTION.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select
PAIRED DEVICE.
Paired device name will be displayed.
# Push MULTI-CONTROL left or right to switch
the device name, BD address, group name and
group ID.
4
Press MULTI-CONTROL to establish con-
nection.
# While connecting, CONNECTING flashes. If
the connection is established, CONNECTED is
displayed.
# If the connection fails, ERROR is displayed. In
this case, try again from the beginning.
Disconnecting a Bluetooth
audio player
This function can be operated only when the
Bluetooth wireless connection is being estab-
lished.
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
CONNECTION.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select
DISCONNECT AUDIO.
4
Press MULTI-CONTROL to disconnect
the Bluetooth wireless connection.

Basic Operations

% Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
% Select a track
Push MULTI-CONTROL left or right.
Note
Even though your audio player does not contain a
Bluetooth module, you can still control it from
this unit via Bluetooth wireless technology. To
control your audio player using this unit, connect
a product featuring Bluetooth wireless technol-
ogy (available on the market) to your audio player.
Introduction to advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3
Turn MULTI-CONTROL to select the
function.
PLAY (play)—STOP (stop)—PAUSE (pause)—
AUTO CONNECT (automatic connection set-
ting)—DEVICE INFO (device information)
Function and operation
PAUSE is the same as that of the built-in CD
player.
Function name
Operation
Refer to Pausing playback on page
PAUSE
18.
Notes
! To return to the ordinary display, press
BAND/ESC.
Section
02
21
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents