Setting The Internal Power Amplifier; Switching The Ever Scroll; Activating The Bt Audio Source; Entering Pin Code For Bluetooth Wireless Connection - Pioneer DEH-P7000BT Operation Manual

Section
D
(Initial Settings
Setting the internal power
amplifier
This unit features high power amplifier. How-
ever, in particular system, external amplifiers
are used instead of internal amplifier. If you
use external amplifiers in order to establish a
multi-amp system, and don't use internal am-
plifier, it is recommended to turn off the inter-
nal amplifier. Turning off internal amplifier
reduces the noise that comes from the beha-
vior of internal amplifier.
• For this function, verify the topic Adjusting
initial settings before initiating the opera-
tion.
1 Display the initial setting menu.
2 Use MULTI-CONTROL to select
BUILT-IN AMP.
3 Press MULTI-CONTROL to turn the inter-
nal power amplifier on.
• To turn the internal power amplifier off, press
MULTI-CONTROL again.
[!J
Switching the ever scroll
When Ever Scroll is set to ON, recorded text in-
formation scrolls continuously in the display.
Set to OFF if you prefer the information to
scroll just once.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 46.
2 Use MULTI-CONTROL to select
EVERSCROLl.
3 Press MULTI-CONTROL to turn the ever
scroll on.
.• To turn the Ever Scroll off, press-
MULTI-CONTROL again.
[!J
@
En
)
Activating the 81 AUDIO source
You need to activate the BT AUDIO source in
order to use a Bluetooth audio player.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 46.
2 Use MULTI-CONTROL to select
BTAUDIO.
3 Press MULTI-CONTROL to turn the
BT AUDIO source on.
• To turn the 8T AUDIO source off, press
MULTI-CONTROL again.
[!J
Entering PIN code for
Bluetooth wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is 0000, but you
can change this in this function.
• With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
1 Display the initial setting menu.
Refer to Adjusting initial settings on page 46.
2 Use MULTI-CONTROL to select
PIN CODE INPUT.
3 Push MULTI-CONTROL up or down to
select a number.
4 Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
5 After inputting PIN code (up to 16 di-
gits), press MULTI-CONTROl.
PIN code can be stored in memory.
When you press MULTI-CONTROL agai n on
the same display, the PIN code you entered is
stored in this unit.