Software Configuration - TP-Link AURANET CAP300-OUTDOOR Installation Manual

Software Configurations
In FIT Mode
In FIT mode, CAP should be managed by the wireless controller.
Please refer to the Wireless Controller User Guide to learn more
information about configuring and using the controller.
Note: The IP address of the wireless controller must be reachable for the
CAPs in the network.
In FAT Mode
1
Launch a web broswer and enter 192.168.0.254 in the address
bar.
Note: To log in to the device, the IP address of your PC should be set in
the same subnet addresses of the device. The IP address is
192.168.0.x ("x" is any number from 1 to 253). Subnet Mask is
255.255.255.0.
2
Create a new username and password for login, and then click
OK.
11