3Com 3CNJ205 User Manual page 78

Installation Planning
WARNING: The NJ205 is designed to be
mounted using the provided mounting plate or
many after-market faceplates. However, some
after-market faceplates stand out from the wall
and do not provide a secure mounting surface
for the IntelliJack. In such cases, it is
recommended to place the 3Com spacer
between the IntelliJack and the after-market
face plate.
To ensure proper horizontal cabling functionality, adhere to the
following standards during installation:
ANSI/TIA/EIA-568
■
Commercial Building Telecommunications Cabling Standard
ANSI/TIA/EIA-569
■
Commercial Building Standard for Telecommunications
Pathways and Spaces
BRITISH STANDARD INSTITUTE (BSI): BS 4664:1970 (1986)
■
The network cabling at your site (from the wiring closet to the
wall or cubicle opening) may already be installed. If it is not,
install the cabling following these general guidelines.
CAUTION: It is recommended that a professional
cable installer perform these procedures. Be sure to
adhere to local safety and regulatory codes during
the cable installation.
74