Connecting To Other Devices; Connecting The Power Cord - Pioneer CDJ-1000 Operating Instructions Manual

BEFORE OPERATIONS: CONNECTIONS

3. Connecting to other devices

A Connecting to other mixers
Connect the AUDIO OUT terminal on the unit with the Line In terminal or AUX terminal on the mixer.
(Do not use the Phono terminal. Otherwise the sound will become distorted and prevent normal playback.)
B Connecting to a stereo amplifier (when not using a DJ mixer)
Connect to the AUX input terminal.
Stereo amplifier
(Do not use the Phono input terminal.)
C Connecting to a component with a digital input terminal
CD recorder or amplifier
with digital inputs
÷ Set the Digital mode switch to ON when using the digital output terminal.
NOTE:
When the Digital mode switch is set to ON, the DJ functions (cue, loop, reloop, tempo adjust, hot cue, Jog dial and reverse playback) do not work. And the muted pause
mode is used instead of the audible pause mode.

4. Connecting the power cord

When all connections have been made, connect the power cord to the AC inlet on the rear panel of the player and connect the power plug to an AC wall outlet or to a power
receptacle on the rear panel of the amplifier.
8
<DRB1297>
En
Supplied audio cable
Digital signal cable
CDJ-1000
CDJ-1000