Basic Operations; Switching Power On/Off; Switching Power On - Pioneer XDV-P9 Owner's Manual

6-disc multi-dvd player

Hide thumbs Also See for XDV-P9:

Table of Contents

When Using the IP-BUS Mode

Operate after confirming the Operation mode switch is set to DVD (or AVM). (See page 7.)

With a head unit other than a Multi-Channel AV Master Unit (e.g. AVM-P9000R, AVM-

P9000), operation with this remote control is not possible. For details, refer to the

"Function Compatibility Chart". (See page 53.)

When Using the STAND ALONE Mode

Operate after confirming the Operation mode switch is set to DVD. (See page 7.)

Switch the display image source to this product.

For details, refer to the connected unit's manual.

Note:

• When you have reloaded the magazine, playback starts from the first disc.

• If you were previously playing a DVD, playback of that disc resumes from where you left

off.

• If power to this product is switched ON/OFF with the POWER button, playback does not

resume from where you left off.

• Playback cannot resume from where you left off until information on all of the discs has been

read.

• With some discs, a menu may be displayed. (See page 19.)

Basic Operations

Press the SOURCE button.

Press repeatedly until DVD is selected, and the disc starts play-

ing.

Press the POWER button on the side of

the remote control.

Power to this product switches ON and a disc starts play-

ing. The remote sensor indicator lights.

Table of Contents

Show Quick Links

Table of Contents