Basic Operations; Switching Power On/Off; Switching Power On - Pioneer XDV-P90 Owner's Manual

Switching Power ON/OFF

Switching Power ON

When Using the IP-BUS Mode
Switch the display image source to this product.
1
For details, refer to the connected unit's manual.
Press the SOURCE button on the Head Unit.
2
Press repeatedly until DVD is selected, and the disc starts playing.
When Using the STAND ALONE Mode
Operate after confirming the Operation mode switch is set to DVD. (See page 7.)
Switch the display image source to this product.
1
For details, refer to the connected unit's manual.
2
Note:
• When you have reloaded the magazine, playback starts from the first disc.
• If you were previously playing a DVD, playback of that disc resumes from where you left
off.
• If power to this product is switched ON/OFF with the POWER button, playback does not
resume from where you left off.
• Playback cannot resume from where you left off until information on all of the discs has been
read.
• With some discs, a menu may be displayed. (See page 19.)
17

Basic Operations

Press the POWER button.
Power to this product switches ON and a disc starts play-
ing. The remote sensor indicator lights.