Operating With The Head Unit - Pioneer XDV-P9 Owner's Manual

Operating with the Head Unit

When in the IP-BUS mode, some operations can be performed with the head unit.
When connected to a Pioneer Multi-Channel AV Master Unit (e.g. AVM-P9000R), refer to
the AV Master Unit Owner's Manual.
When operating with another head unit, refer to the following Function Compatibility Chart
and Function Mode Switching, and operate with the appropriate buttons.
7 Function Compatibility Chart
Function
Source switching
Disc switching (selection by disc number)
Disc switching
(moving ahead one disc number at a time)
Disc switching
(moving ahead or back one disc number at a time)
Chapter/track advance/return
Fast forward/reverse
*1 Operation is possible when the AUTO (A/M) mode is set to AUTO.
*2 Operation is possible when the AUTO (A/M) mode is set to MANU.
7 Function Mode Switching
When using convenient functions other than those usually used, switch the mode and operate.
Press the F button.
1
Press the button repeatedly until the desired mode is selected.
FUNC1 = FUNC2 = FUNC3 = FUNC4 = AUTO (A/M)
Press the 5 button (press the ∞ button to switch OFF).
2
Perform AUTO (A/M) operation with the 2/3 button.
Mode
FUNC1
FUNC2
FUNC3
FUNC4
Mode
AUTO (A/M)
53
Press the 5 button
Head unit display switching
Pause (see page 24)
Scan play (see page 38)
Repeat range switching
(See pages 32, 35 and 37)
Press the 2/3 button
AUTO/MANUAL switching
Reference page Button
17 SOURCE, SOURCE/OFF
—— 1 – 6
BAND, 23
23
5/∞
23
2/3*
20
2/3*
22
Press the 5 button for 2 seconds
———
Random play (see page 38)
———
———
Press the 2/3 button for 2 seconds
———
1
2