Using The Phone Book - Pioneer SUPER TUNER III D FH-P8000BT Operation Manual

Section
02 Operating this unit
# If you do not operate anything within about 30
seconds, the list display is canceled automati-
cally.
4 Press MULTI-CONTROL to make a call.
# While in the phone number list, press and
hold MULTI-CONTROL to add or delete + to the
phone number.
5 To end the call, press

Using the phone book

Before using the phone book, you need to set
up the phone book. To set up the phone book,
refer to Downloading phone books from your
cellular phone on page 40 and refer to Transfer-
ring entries to the phone book on page 40.
Calling a number in the phone book
After finding the number you want to call in
the phone book, you can select the entry and
make the call.
1 Press LIST to display PHONE BOOK
(phone book).
ABC SEARCH appears in the display.
Refer to Using the phone number list on the
previous page.
2 Turn MULTI-CONTROL to select the first
letter of the name you are looking for.
# You can also perform the same operation by
pushing MULTI-CONTROL up or down.
3 Press MULTI-CONTROL to display en-
tries.
The display shows the first three Phone Book
entries starting with that letter (e.g. "Ben",
"Brian" and "Burt" when "B" is selected).
4 Turn MULTI-CONTROL to select a phone
book entry you want to call.
# You can also perform the same operation by
pushing MULTI-CONTROL up or down.
36
En
5
phone number list of the selected entry.
# You can also display the phone number list of
the selected entry by pushing MULTI-CONTROL
right.
# You can scroll literal information by pressing
and holding DISP.
# If several phone numbers are included in an
entry, select one by turning MULTI-CONTROL.
.
# If you want to go back and select another
entry, push MULTI-CONTROL left.
6
7
Editing phone numbers
You can edit the phone numbers of phone
book entries.
1
desired phone book entry.
See step 1 to 5 on Calling a number in the
phone book on this page for how to do this.
2
play the edit screen.
3
EDIT NUMBER (number edit screen).
Turning MULTI-CONTROL switches input
screens in the following order:
EDIT NUMBER (number edit screen)—
EDIT GENRE (genre edit screen)—
CLEAR MEMORY (clear memory screen)
4
move the cursor to the number you want
to change.
5
change numbers.
Repeat these steps until you have finished
changing the number.
# Press and hold MULTI-CONTROL to add or
delete + to the phone number.
Press MULTI-CONTROL to display the
Press MULTI-CONTROL to make a call.
To end the call, press
Display the phone number list of your
Press and hold MULTI-CONTROL to dis-
Turn MULTI-CONTROL to display
Push MULTI-CONTROL left or right to
Push MULTI-CONTROL up or down to
.