Datavideo SE-2850 Instruction Manual page 67

Updating the SE-2850 firmware:
9. Click the Yes button to confirm you wish to perform the firmware update when you see
the prompt window "Do you really want to perform firmware update?".
10. The update process will begin and two progress bars will be shown. The lower bar, Total
Progress, will take around 15 minutes to complete.
11. Once this process is complete close the application and power cycle the SE-2850.
The firmware is now updated, but please continue with the following steps in order to
complete the switcher's update process.
12. Install the SEConfig software on to the Computer. When the SE-2850 has restarted,
double click the SEConfig dv icon to launch the second part of the update process.
7. The following
displayed. Select Device is connected
via Ethernet then click NEXT.
8. POWER ON the SE-2850 and as soon as
it is discovered by the Computer, select
"Automatically update the device to
latest firmware version" then click
NEXT.
67
window will be