Loose Fuel Filler Cap Message - Dodge Challenger 2018 Owner's Manual

252 STARTING AND OPERATING
WARNING!
• Never have any smoking materials lit in or near the
vehicle when the fuel door is open or the tank is
being filled.
• Never add fuel when the engine is running. This is
in violation of most state and federal fire regulations
and may cause the "Malfunction Indicator Light" to
turn on.
• A fire may result if fuel is pumped into a portable
container that is inside of a vehicle. You could be
burned. Always place fuel containers on the ground
while filling.
CAUTION!
• Damage to the fuel system or emissions control
system could result from using an improper fuel
tank filler tube cap.
• A poorly fitting fuel filler cap could let impurities
into the fuel system.
• A poorly fitting fuel filler cap may cause the "Mal-
function Indicator Light (MIL)" to turn on.
• To avoid fuel spillage and overfilling, do not "top
off" the fuel tank after filling. When the fuel nozzle
"clicks" or shuts off, the fuel tank is full.
NOTE:
• When the fuel nozzle "clicks" or shuts off, the fuel tank
is full.
• Tighten the gas cap until you hear a "clicking" sound.
This is an indication that the gas cap is tightened
properly. The MIL in the instrument cluster may turn on
if the gas cap is not secured properly. Make sure that the
gas cap is tightened each time the vehicle is refueled.

Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines that the fuel
filler cap is loose, improperly installed, or damaged, a
"gASCAP" message will display in the odometer or a
"Check Gascap" message will display in the instrument
cluster. If this occurs, tighten the fuel filler cap properly
and press the Trip Odometer button to turn off the mes-
sage. If the problem continues, the message will appear the
next time the vehicle is started.
A loose, improperly installed, or damaged fuel filler cap
(Continued)
may also turn on the MIL.
CAUTION! (Continued)