Dodge Challenger 2018 Owner's Manual page 21

Hide thumbs Also See for Challenger 2018:
Table of Contents

Advertisement

1st Press Of Key Fob Unlocks
This feature lets you program the system to unlock either
the driver's door or all doors on the first push of the unlock
button on the key fob.
To change the current setting, refer to "Uconnect Settings"
in "Multimedia" for further information.
Flash Lights With Lock
This feature will cause the turn signal lights to flash when
the doors are locked with the key fob. This feature can be
turned on or turned off. To change the current setting, refer
to "Uconnect Settings" in "Multimedia" for further infor-
mation.
Headlight Illumination On Approach
This feature activates the headlights for up to 90 seconds
when the doors are unlocked with the key fob. The time for
this feature is programmable on vehicles equipped through
Uconnect. To change the current setting, refer to "Uconnect
Settings" in "Multimedia" for further information.
GETTING TO KNOW YOUR VEHICLE 19
To Unlatch The Trunk
Push the trunk button on the key fob two times within five
seconds to unlatch the trunk.
If the vehicle is equipped with Passive Entry, refer to
"Keyless Enter-N-Go — Passive Entry" under "Getting To
Know Your Vehicle" for further information.
To Lock The Doors And Trunk
Push and release the lock button on the key fob to lock all
doors.
The turn signal lights will flash and the horn will chirp to
acknowledge the signal if programmed. Refer to "Uconnect
Settings" in "Multimedia" for further programmable infor-
mation.
NOTE: To lock the doors with passive entry, Refer to
"Keyless Enter-N-Go — Passive Entry" located in "Doors"
in "Getting To Know Your Vehicle" for further information.
If one or more doors are open, or the trunk is open, the
doors will lock. The doors will unlock automatically if the
key is left inside the passenger compartment, otherwise the
doors will stay locked.
3

Advertisement

Table of Contents
loading

Table of Contents