Dodge Challenger 2018 Owner's Manual page 20

Hide thumbs Also See for Challenger 2018:
Table of Contents

Advertisement

18 GETTING TO KNOW YOUR VEHICLE
To remove the emergency key, slide the mechanical release
button on the back of the key fob sideways with your
thumb and then pull the key out with your other hand.
Emergency Key Removal Process
1 — Mechanical Release Button
2 — Emergency Key
To Unlock The Doors
Unlock The Doors
Push and release the unlock button on the key fob once to
unlock the driver's door or twice within five seconds to
unlock all doors.
The turn signal lights will flash to acknowledge the unlock
signal. The illuminated entry system will also be activated.
NOTE: All door unlock settings can be programmed to
your convenience through Uconnect Settings. Refer to
"Uconnect Settings" in "Multimedia" for further informa-
tion.
• Unlock the driver door on the first push of the key fob
unlock button.
• Unlock all doors on the first push of the key fob unlock
button.
NOTE: To unlock doors and trunk with passive entry,
Refer to "Keyless Enter-N-Go — Passive Entry" located in
"Doors" in "Getting To Know Your Vehicle" for further
information.
NOTE: When you use the key fob to open any door, the
courtesy lights, overhead lights, and approach lighting in
the outside mirrors (if equipped) will turn on. Refer to
"Interior Lights" in "Getting To Know Your Vehicle" for
further information.

Advertisement

Table of Contents
loading

Table of Contents