③
Lower the contact cover so that
the strands are contacted.
Assigning the installation cables to the pins on the IE FC RJ45 plug
Between the four individually colored wires of the IE FC RJ45 plug pins, the following
assignments are made:
Pin no.
1
2
3
6
Additional references
For more information, please refer to:
● The A&D Mall,
● The Catalog IK PI
● The manual titled "SIMATIC NET Twisted Pair and Fiber-Optic Networks"
NCU
Manual, 07/2007, 6FC5397-0AP10-2BA0
Wire color
yellow
orange
white
blue
(entry ID: 8763736).
④
Close the case cover and press
down until it connects with the
plug case below.
Signal name
Meaning
TX+
Transmit data +
TX-
Transmit data -
RX+
Receive data +
RX-
Receive data -
Connections
9.8 PROFINET
⑤
Use a screwdriver to turn the
snap ring 90°. This will ensure
tension and cable grip.
89