Connectable Drive-Cliq Components - Siemens SINUMERIK 840D sl Manual

9.5.2

Connectable DRIVE-CLiQ components

Components
As a rule, all SINAMICS components approved for SINUMERIK can be connected using the
DRIVE-CLiQ interface.
Table 9-2
Component
Active/Smart Line Module,
Booksize
Single/Double Motor
Module, Booksize
NX10/15
SMC10/20/30
SME20/25
DMC20
TM15
Additional references
● You can find information about Line Modules and Motor Modules in the "SINAMICS S120
● You can find information on all other modules in the SINAMICS S120 "Control Units and
NCU
Manual, 07/2007, 6FC5397-0AP10-2BA0
Components with DRIVE-CLiQ
Booksize Power Units" Manual.
Additional System Components" Manual.
Description
Line Modules provide the central power supply to the DC link.
Motor Modules draw their power from the DC link to supply the
connected motors.
Drive expansion module for up to 6 axes
Cabinet-Mounted Sensor Modules are needed when a motor with a
DRIVE-CLiQ interface is not available and when external encoders
are required in addition to the motor encoder.
Measuring systems outside the cabinet can be connected directly to
the Sensor Module External.
DRIVE-CLiQ Hub Modules are used to implement star-shaped
distribution of a DRIVE-CLiQ line.
The number of available digital inputs and outputs within a drive
system can be expanded with the Terminal Module.
Connections
9.5 DRIVE CLiQ components
79