Muting The Sound; Using The Wireless Surround Speaker - Pioneer S-DV515 Operating Instructions Manual

04 Home theater sound

Muting the sound

Use the MUTE button if you need to
momentarily turn off all sound from the
speakers.
• Press MUTE to mute the volume.
To cancel, adjust the volume or press MUTE
again.
Using the wireless surround
speaker
The wireless speaker supplied with your
system can be used for multi-channel sound
with your main setup, or as a second stereo
speaker system.
1 Press WIRELESS.
The current setting is shown in the display.
36
En
TUNE+
ST– ST+
ENTER
TUNE–
MUTE MUTE SOUND
DVD MENU RETURN
TUNE+
ST– ST+
ENTER
TUNE–
MUTE SOUND
MASTER
VOLUME
TV CONTROL
CH INPUT VOL
BASS MODE BASS MODE DIALOGUE VIRTUAL SB
AUTO SURROUND ADVANCED
PROGRAM REPEAT RANDOM
AUDIO SUBTITLE ANGLE
HOME
ZOOM TOP MENU MENU
1 2 3
SYSTEM
CH LEVEL
SETUP TEST TONE
4 5 6
QUIET/ TIMER/
DIMMER MIDNIGHT CLOCK
7 8 9
FOLDER– FOLDER+
0
ENTER
CLR
WIRELESS
MAIN SUB SUB ROOM SETUP
2 Use (cursor up/down) to select
'W.Surr.?', 'W.Stereo?', or 'W.Off?'.
• W.Surr. – Sounds going to the surround
left and right channels are heard through
the wireless speakers.
• W.Stereo – Any source playing through
the main system is heard in stereo
through the wireless speakers (multi-
channel sources will be downmixed to
stereo).
• W.Off – The wireless speakers are muted.
• Make sure to stop/turn off the source and
switch off the wireless speaker when
switching speaker systems. The wireless
speaker will output the source at very loud
volumes if the wireless speaker is set to
SURROUND and the main unit is set to
W.Stereo. In this case, the volume
control has no effect, so please follow
these precautions.
3 Press ENTER.
4 Set the WIRELESS MODE switch on the
wireless speaker to the same mode you
selected above.
• If you selected W.Off in step 2, the
WIRELESS MODE switch has no effect.
• When you select W.Surr. (SURROUND
on the wireless speaker), you won't be
able to hear anything through the
speakers connected to the surround left
and right speaker terminals. The signals
are sent to the wireless speakers instead.