Swann DVR-1590 Series Instruction Manual page 38

The Playback Interface
Calendar
Playback Mode
Camera List
1 2
Timeline
Time Period
4.
This button allows you to set mark in and out
points on your video which you can then copy
to a USB flash drive. When you have selected a
video to play, press this button at the mark in
point and press it again at the mark out point.
Press the button again to save (a disk icon will
be shown). For the backup type, leave the de-
fault selection or change to this to AVI or MP4
Click for contents
22/08/2016 12:57:58 PM
CH1
22/08/2016 12:57:58 PM
CH4
22/08/2016 12:57:58 PM
CH7
4 6
3 5
if you need to play this on your computer. In-
sert a USB flash drive to your DVR then click
"Save". You have the choice of formatting the
flash drive or creating a new folder if required.
Click "OK" to save then click "Close" when fin-
ished.
5. Click this button to mute the audio. Click
again to unmute.
22/08/2016 12:57:58 PM
CH2
22/08/2016 12:57:58 PM
CH5
22/08/2016 12:57:58 PM
CH8
When selecting five or
more cameras for play-
back, each camera is rep-
resented as a single re-
cording on the timeline.
22/08/2016 12:57:58 PM
CH3
Play
22/08/2016 12:57:58 PM
CH6
6.
Click and hold the slider left or right to
change the volume level.
Video Type:
Indicates the video type on the
timeline.
Smart Mode:
This mode allows you to define a
specific area of the video which then makes it
easier to find what you are searching for (see
page 39 - Smart Mode).
Click to close
Smart Mode
Video Type
38