Connecting A Bluetooth Audio Player; Playing Songs On A Bluetooth Audio Player; Stopping Playback; Disconnecting A Bluetooth Audio Player - Pioneer Premier DEH-P310UB Operation Manual

Available accessories
! To return to the ordinary display, press
BAND/ESC.
! If a Bluetooth audio player is not connected to
this unit yet, CONNECTION OPEN and
DEVICE INFO appear in the function menu
and other functions are not available.
! If a Bluetooth audio player is connected via
higher level, CONNECTION OPEN does not
appear in the function menu and the other
functions are available.
! If a Bluetooth audio player is connected via
lower level, only DISCONNECT AUDIO and
DEVICE INFO appear in the function menu.
! If you do not operate functions other than
CONNECTION OPEN and
DISCONNECT AUDIO within about 30 sec-
onds, the display is automatically returned to
the ordinary display.
Connecting a Bluetooth audio
player
1 Use MULTI-CONTROL to select
CONNECTION OPEN in the function menu.
2 Press MULTI-CONTROL to open the con-
nection.
ALWAYS WAITING is displayed. This unit is
now on standby for connection from Bluetooth
audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit is automatically established.
Note
Before you can use audio players you may need
to enter the PIN code into this unit. If your player
requires a PIN code to establish a connection,
look for the code on the player or in its accompa-
nying documentation. Refer to Entering PIN code
for Bluetooth wireless connection on page 28.
Playing songs on a Bluetooth
audio player
1 Use MULTI-CONTROL to select PLAY in
the function menu.
2 Press MULTI-CONTROL to start play-
back.

Stopping playback

1 Use MULTI-CONTROL to select STOP in
the function menu.
2 Press MULTI-CONTROL to stop the play-
back.
Disconnecting a Bluetooth
audio player
1 Use MULTI-CONTROL to select
DISCONNECT AUDIO in the function menu.
2 Press MULTI-CONTROL to disconnect
the Bluetooth audio player.
DISCONNECTED is displayed. The Bluetooth
audio player is now diconnected from this
unit.
Displaying BD (Bluetooth
Device) address
1 Use MULTI-CONTROL to select
DEVICE INFO in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Use MULTI-CONTROL to select the de-
sired setting.
Turn to change the setting.
DEVICE NAME (Device name)—BD ADDRESS
(BD (Bluetooth Device) address)
Section
06
33
En