Playing A Bluetooth Device; Searching And Playing Tracks - Sony XAV-W651BT Operating Instructions Manual

Playing a BLUETOOTH Device

You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile).
1
Make a BLUETOOTH connection with the
audio device (page 9).
2
Press HOME, then touch [BT Audio].
3
Operate the audio device to start playback.
4
Adjust the volume on this unit.
Notes
• Depending on the audio device, information such as title,
track number/time, and playback status may not be
displayed on this unit.
• Even if the source is changed on this unit, playback of the
audio device does not stop.
To match the volume level of the BLUETOOTH
device to other sources
You can reduce the volume level differences
between this unit and the BLUETOOTH device:
During playback, touch
between –10 and +15.

Searching and Playing Tracks

Repeat play and shuffle play
1
During playback, touch
(shuffle) repeatedly until the desired play
mode appears.
Playback in the selected play mode may take
time to start.
Available play modes differ depending on the
selected sound source.
Note
Repeat play and shuffle play are not available for version 2.0
VCD with the PBC function.
, then set [Input Level]
(repeat) or
Direct search play (XAV-W651BT)
1
During disc or USB playback, press the
number buttons on the remote commander
to enter an item (e.g., track) number, then
press ENTER on the remote commander.
Playback starts from the beginning of the
selected point.
Note
During VCD playback, this function is available only when
playing a VCD without PBC functions.
Searching for a file from the list screen
1
During disc (XAV-W651BT) or USB playback,
touch .
The list screen from the currently played item
appears.
Furthermore, touch
(photo) to list up by file type.
2
Touch the desired item.
Playback starts.
(audio), (video), or
13
GB