Sony XAV-W651BT Operating Instructions Manual page 105

Route Bar
Select Settings in the Main Menu, then select Appearance.
Select Arrival information
Select Route information to change the route information you see on the route bar.
Show wide route bar if possible
The wide route bar is not shown by default. You can select this setting to switch on the wide route
bar in the guidance view.
Note: The wide route bar can only be shown if the screen is wide enough.
When the wide route bar is shown, you see more information about your route.
Arrival information
Select Arrival information to change the following settings:
Show remaining distance

Select this setting to show the remaining distance left to travel in the arrival information panel
during navigation.
 Show remaining time
Select this setting to show the remaining time left to travel in the arrival information panel
during navigation.
Switch between distance and time automatically

Select this setting to control the automatic switching between remaining distance and remain-
ing time in the arrival information panel.
 Show arrival information for
Use this setting to control whether you want to see information about the destination or the
next stop in the arrival information panel.
Tip: To find out where the different panels are in the guidance view or map view, see
the screen.
to change the arrival information you see in the route bar.
59
What's on