Switching Auto Pi Seek; Switching The Warning Tone; Switching The Face Auto Open; Switching The Auxiliary Setting - Pioneer DEH-P9800BT Operation Manual

High power dsp cd/mp3/wma/aac player with bluetooth wireless technology, rds tuner and multicd control
Hide thumbs Also See for DEH-P9800BT:
Table of Contents

Advertisement

Available languages

Available languages

Initial Settings
Note
The tuning step remains at 50 kHz during manual
tuning.

Switching Auto PI Seek

The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.
1
Use MULTI-CONTROL to select
Auto PI seek.
Auto PI seek appears in the display.
2
Press MULTI-CONTROL to turn Auto PI
seek on.
ON appears in the display.
# To turn Auto PI seek off, press
MULTI-CONTROL again.

Switching the warning tone

If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone will sound. You
can turn off the warning tone.
1
Use MULTI-CONTROL to select
Warning tone.
Warning tone appears in the display.
2
Press MULTI-CONTROL to turn warning
tone on.
ON appears in the display.
# To turn warning tone off, press
MULTI-CONTROL again.

Switching the face auto open

For theft protection, the front panel opens
automatically and easily detaches. Face auto
open is on as a default.
1
Use MULTI-CONTROL to select
Face auto open.
Face auto open appears in the display.
2
Press MULTI-CONTROL to turn the face
auto open on.
ON appears in the display.
# To turn the face auto open off, press
MULTI-CONTROL again.

Switching the auxiliary setting

Auxiliary equipments connected to this unit
can be activated individually. Set each AUX
source to ON when using. About connecting
or using auxiliary equipments, refer to Using
the AUX source on page 99.
1
Use MULTI-CONTROL to select AUX1/
AUX2.
AUX1/AUX2 appears in the display.
2
Press MULTI-CONTROL to turn AUX1/
AUX2 on.
ON appears in the display.
# To turn AUX off, press MULTI-CONTROL
again.

Switching the dimmer setting

To prevent the display from being too bright at
night, the display is automatically dimmed
when the car's headlights are turned on. You
can turn the dimmer on or off.
1
Use MULTI-CONTROL to select Dimmer.
Dimmer appears in the display.
Section
15
95
En

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents