Video Status; Xstatus Video Input; Xstatus Video Monitors; Xstatus Video Input Connector [N] Connected - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

Video status

xStatus Video Input

Shows the top level overview of the video input status.

xStatus Video Monitors

Returns the monitor layout mode.
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor.
Quadruple: The layout is distributed on four monitors, so that each remote participant and the
presentation will be shown on separate monitors.
Value space of the result returned:
<Single/Dual/DualPresentationOnly/Triple/Quadruple>
Example:
xStatus Video Monitors
*s Video Monitors: Single
** end

xStatus Video Input Connector [n] Connected

Shows whether is something connected to the specified connector. Not all connections can be
detected.
Value space of the result returned:
<False/True/Unknown>
Example:
xStatus Video Input Connector 1 Connected
*s Video Input Connector 1 Connected: True
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration

xStatus Video Input Connector [n] SignalState

xStatus Video Input Connector [n] SourceId

xStatus Video Input Connector [n] Type

216
xCommand
Shows the signal state for the specified input.
Unknown: The signal format is unknown.
OK: A signal is detected and the signal format is supported.
Unsupported: A signal is detected, but the signal format is not supported.
Value space of the result returned:
<OK/Unknown/Unsupported>
Example:
xStatus Video Input Connector 1 SignalState
*s Video Input Connector 1 SignalState: OK
** end
Shows the identifer of the input source that the connector is associated with.
Value space of the result returned:
<Integer>
Example:
xStatus Video Input Connector 1 SourceId
*s Video Input Connector 1 SourceId: 1
** end
Shows which connector type it is.
Value space of the result returned:
<Composite/DVI/HDMI/Unknown/YC>
Example:
xStatus Video Input Connector 1 Type
*s Video Input Connector 1 Type: HDMI
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.